MDS A220-PD Autoriv manual workstation insertion assembly system

MDS A220-PD

MDS

Type: MDS A220-PD

MDS A220-PD Manual Assembly Station

The A220-PD assembly system is a stationary manual assembly station for processing press-in components.

Intended use:
The machine is used for pressing in fastening elements.
The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine.
The operator then starts the pressing process using a foot switch.
The pressing process runs automatically.

Blsdpfx Afezgr I Rjmep
Fastening elements:
Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin

Thread size - M5, M6, M8, M10, M12

Technical data:
Control voltage 230V/10A
Connection plug HAN 10, not wired
Temperature ranges:
Transport: -20°C to +60°C
Operation: +10°C to +40°C
Storage: -20°C to +50°C
Compressed air connection:
Operating pressure: 6 bar
Quality: Treated, water-free, and oil-free air
Connection: 1/2" connection thread
Machine dimensions:
Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm
Values apply to a working height (AH) of 1000 mm.
Pneumatics:
Standard: Manufacturer SMC
Variant: Manufacturer FESTO
Control:
Standard: Manufacturer B & R
Variant: Manufacturer Siemens
Machine type C-frame A220-PD
Continuous sound pressure level (LpA) 78 dB
Operating modes:
The operating modes can be changed in the control panel.
Automatic mode:
The fastening elements are pressed in automatically.
Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process.
Manual mode:
In manual mode, adjustments are made to the machine.
In this operating mode, movements can be activated individually.
Weight: Approx. 600 kg
Condition: used
Scope of delivery: (See image)
(Subject to changes and errors in the technical data!)
We will be happy to answer any further questions you may have over the phone.

Oglas je automatski preveden. Moguće su greške u prevodu.